Gns530w manual

Page Selecting An Ils Approach 2. Do NOT follow this extended course. Follow published missed approach procedures using the OBS key to initiate the missed approach sequence. Fly the guidance provided by the unit to the series unit automatically sequences through each ARTTY intersection and hold. All U. Select the desired facility name or location. The none Airport Location Page also displays facility name and location, as well as fuel availability, best available Continue turning the small right knob to As described earlier in this section.

A map image provides a layout diagram for each approach and transition. Continue turning the small right knob to select the desired departure. Press ENT. The NDB page also displays the frequency and a weather broadcast indication if applicable. There are no options for the NDB page. To reference With the User Waypoint Page displayed, press your present position, follow the steps above, the small right knob to activate the cursor.

Modifying User Waypoints To modify a user waypoint by changing reference waypoint information: To modify an existing waypoint, select that With the User Waypoint Page displayed, press waypoint on the User Waypoint Page and enter the the small right knob to activate the cursor. Use User Waypoint Page Options the small and large right knobs to change the The following User Waypoint Page Options are radial from the reference waypoint, if desired.

The User Waypoint List allows you to review, To delete a user waypoint: modify, rename or delete a selected user waypoint, or to delete all user waypoints currently stored in memory. Select the User Waypoint List. Turn the large right knob to highlight the Turn the large right knob to highlight the desired user waypoint. Navigation and projected to enter the airspace. Once one of the Select the Nearest Airspace Page.

The standby frequency always appears localizer and glideslope receivers with the desired below the active frequency. Use the small and large Page. Use the small and large right knobs to enter the time or date. Page RAIM during approach previous item. RAIM prediction helps you Checklists — To start Checklist? Use the small and large right knobs to enter the desired buffer distance. Turn the small right knob to select the desired surface. Press MENU to display a page options window.

Use the To change the rate, turn off. By default the messages are off. Please, refer to the instruc- detection and fault exclusion. TAWS audio alerts are not available. Page land data database. Land data does not appear on the Map Page. COM has failed — GNS W only The unit has Other unit functions continue to work normally, however detected a failure in its communications transceiver. The glideslope receiver within the boundaries of a special use airspace.

This mes You are inbound and within 3 nautical miles of the FAF; Try pressing the switch again lower right corner of the W-series unit display: to cycle its operation. The W-series unit see your authorized dealer or contact Garmin directly automatically monitors RAIM and warns you with an alert at the address or phone numbers listed on page ii. The W-series unit begins a smooth CDI scale tran- sition from the 2. Garmin AT, Inc. Garmin Europe Ltd.

This manual is also suitable for: Gps w Gns aw. Print page 1 Print document pages. Rename the bookmark. Delete bookmark? This options list allows you to access additional features or make settings changes which relate to the currently displayed page.

Press and hold this key to immediately display the Default Navigation Page, regardless of which page is currently displayed. E The enter key ENT is used to approve an operation or complete data entry. With the on-screen cursor enabled, the large right knob allows you to move the cursor about the page. The large right knob GPS is used to select between the various page. Press this knob momentarily to display the on-screen cursor.

Then, turning the small right knob steps through the NRST pages. As a Suspend key, it is used to select manual or automatic sequencing of waypoints. Pressing the OBS key again returns to normal operation, with automatic sequencing of waypoints.

M The message MSG key is used to view system messages, important warnings, and requirements. The vertical navigation VNAV key allows. Otherwise, you may select the desired airport, then the desired procedure. Press the ENT key to acknowledge the last databasepageandproceedtotheinstrumentpanel self-test page.

There may be more self-test screens depending on optional equipment installed in your aircraft. The instrument panel self-test page allows you to verify that the unit is communicating properly with in-panel instruments. Other pages may exist depending on the installation of optional features.

Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password?

Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. GNS W. Power-up Sequence. You can only view or download manuals with.